What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
10.06.2025 18:10

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
He then describes the function of a fuse.
Power Rankings: RBC Canadian Open - PGA Tour
Edit 2024–10.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
At one ohm, the resistor has a maximum of 1 watt power.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
This is where this question deviates from being a 'generic' question, and becomes more specific.
He then describes Rainy Season and Lightning.
2024–10–10[John johnson John Johnson ]
[old diagram got deleted by accident]
This device then solves the entire problem.
Milky Way has 50-50 chance of colliding with neighbor galaxy - NewsNation
This is where the MOV conducts again, and dissipated the energy.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Upvotes:
What do you think, TikTok is nothing but another porn site? Do you agree or not? Why?
[image of Common-mode choke]
It also is a device that limits the change in current flow.
It seems Mohan does not understand the difference between a comment and an Answer.
Do you as a gay male enjoy the feeling of getting a penis in your anus?
In schematic diagrams this is the symbol for a fuse:
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Scientists Crack 30-Year Mystery Behind “Holy Grail” Cancer Drug - SciTechDaily
For this case there are devices called Metal oxide varistors (MOV).
This is 'the assistant's answer'
There are three different concepts here that are getting confused.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This one hit behind the barn.
The other is “what does a “fuse” do?”
but this device (an Inductor) … impedes the rapid changes in the current.
But… the neutral is now “floating” because of the 1 ohm resistance.
One is “what exactly is in a ‘surge protector’ ? ”
Evan Engram embraces the “Joker” role in the Broncos’ offense - NBC Sports
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
At least they know the answer if they wanted it.
so, what happens?
I post the exact comment here.
First Sentence:
Because the load is inductive, the current lags the voltage.(by a bit).
This is the picture of an electronic coil of wire wound around a core of magnetic material.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
These are simplified answers to the original question, and does not change anything I wrote above.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Now when you have a certain ac resistance, then a current flows in a loop.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
a photo is worth a thousand words.
The third is lightning and “how it gets conducted into a home.”
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
An AC voltage/ current source, and an ac inductive load.
What is lightning?
but I think this circuit , shows a few more pieces.
what exactly is a ‘surge’ protector?
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
But it can get overloaded, and no longer works.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
A circuit breaker is similar, but is resettable.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
the problem then depends on "how fast does the fuse operate?".
He then asserts :
So, the voltage could go up to 500 volts, and the fuse will not open up.
The MOV will conduct when the voltage exceeds 50% of line voltage.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
2024–10–14 [Omar Gharbi Omar Gharbi ]
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Barnstars:
Here is a simplified AC power diagram.
There are two important concepts here.
What does a fuse do?
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
A fuse is a non-resetable over current circuit protector.
These devices are installed between the “hot” and “neutral” and protective ground.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
2024–10–16 [ OO OLAOYE OYEBODE ]
eight
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
One
nine
(Dc diagram shown, AC is similar).
The bolt then partially travels down the line to your home.